Step 10: Build the Top Frame

You need the second large cardboard circle (the one that's the same size as the base) and some thin styrofoam. I gently bent the styrofoam along the edge of the cardboard and taped them in place with duct tape.

I snipped the bottom sections of 3 wire hangers off with wire clippers before taping the top sections together. These served as the frame for the tent.

By taping them together, I was able to bend them to fit and have them all be relatively the same shape. Then I snipped the top hook off two of them, and used the third to wrap them all together. Now you can remove the tape.

Once that was done, I began attaching them one at a time (just swing one hanger out from the others) to the frame with duct tape. When you are done, you should have a total of 6 sections for the tent. Be sure to keep it centred, and watch that you're spacing the sections evenly.